Leave a Message

Thank you for your message. We will be in touch with you shortly.

Hiring an Asbestos Abatement Company

Hiring an Asbestos Abatement Company

Your Guide to Hiring an Asbestos Abatement Company

Hiring an asbestos abatement company, and not doing it yourself, is the wisest and safest decision when it comes to removing asbestos from any residential, commercial, or public building. Asbestos abatement companies will properly test for the toxic mineral, follow strict regulations and processes, and carry the right abatement removal equipment to keep them, others, and you safe from exposure.
 

01. Dangers of Asbestos

Understanding the Dangers of Asbestos

Asbestos is dangerous because it’s a known carcinogen, and inhaling or ingesting it is linked to mesothelioma, asbestosis, and other health problems. Although asbestos isn’t banned in the U.S., its use is limited. However, asbestos-containing materials (ACM) still pose a danger to the public because they were common building products in homes, schools, and other structures built before the 1980s.
 
Asbestos abatement involves the identification, removal, repair, and encapsulation of materials or products in a structure to eliminate the threat of exposure to toxic asbestos fibers. It’s best handled by a professional asbestos abatement company.
 
 
What is asbestos abatement? Duration: 0:50
 
Watch: Senior Writer Tim Povtak explains what asbestos abatement is and why it is important to hire a professional.
 

Common Asbestos-containing Materials in Buildings

Because asbestos doesn’t burn, it was used in many products to resist heat. The “miracle mineral” made these asbestos-containing materials valuable to the building industry.
 
Roof Shingles & Siding
 
Vermiculite Insulation, Ceiling Tiles & Coatings
 
Popcorn Ceilings
 
Drywall & Cement Sheets
 
Plaster, Putties & Caulking
 
Electrical Switchboard Panels
 
Plumbing Fixtures
 
Pipe & Duct Coverings
 
Thermal Boiler & Fireplace Insulations
 
Vinyl Floor Tiles
 

02. Reasons for Testing

Reasons for Testing a Structure for Asbestos

Before renovating or tearing down a building or home, the structure should be tested for asbestos because exposure to asbestos fibers may lead to health problems. Although asbestos-containing products are generally safe when left undisturbed, they become brittle over time and can crumble. But the popularity of do-it-yourself (DIY) projects has heightened possible asbestos exposure.
 
  1. DIY Remodeling Projects
  2. Natural or Manmade Disasters Disturbed a Building’s Structure
  3. You Own a Structure Built Before 1980
  4. Crumbled, Worn, or Broken Asbestos-Containing Materials Found in a Building
“Too many times with asbestos, the hazards are underestimated. If there is going to be what I call a ‘dusty operation’ (sanding, sawing, or breaking materials) in an older home or building, you don’t want to do that without having it checked [for asbestos] first. And leave abatement to the professionals.” - Jack Leonard - President of Environmental Management Institute, Indianapolis
 

03. Importance

Why is Asbestos Abatement Important?

If damaged asbestos-containing materials are not properly removed by an asbestos abatement company, they can endanger your life and the lives of others who come into contact with asbestos dust, fibers or raw asbestos materials.
 

Fast Facts About Asbestos

 
  • Inhaling or ingesting asbestos can lead to serious health issues such as mesothelioma cancer, asbestosis, pleural plaques, and asbestos lung cancer.
 
  • About 3,000 people are diagnosed annually with mesothelioma in the U.S. An estimated 10,000 people die annually from some type of asbestos-related disease.
 
  • Microscopic asbestos fibers are .01 microns thick (18,000 times thinner than a human hair).

Steps to Take if You Suspect Asbestos Contamination

The most important first step is to not touch the suspicious materials. Let a professional asbestos abatement company handle the job.
 

Do’s

  • Keep Children Out of Area
  • Limit Activities in the Area
  • Call a Licensed Asbestos Abatement Company

Don’ts

  • Don’t Sweep, Vacuum, or Dust Possible Asbestos Debris
  • Don’t Remove Suspicious Materials

04. Hiring Tips

Tips for Hiring an Asbestos Abatement Company

Asbestos abatement companies are not all the same. Some specialize only in asbestos abatement, while others offer environmental services, demolition services, and general contracting services that may include abatement.
 
Within the U.S., asbestos abatement regulations vary from state to state and city to city, some extend beyond the federal laws that require Occupational Safety and Health Administration (OSHA) and Environmental Protection Agency (EPA) licensing.
 
Homeowners are not legally required to use a licensed asbestos abatement company, but it is strongly recommended.
 
Before hiring an asbestos abatement company, verify its qualifications. Find the one that best suits your needs.
 

05. Types

Type of Asbestos Abatement Work

  • Class I asbestos work: Activities involving the removal of asbestos used to prevent heat loss or gain, surfacing asbestos-containing materials and those suspected of containing asbestos.
  • Class II asbestos work: Removal of nonthermal asbestos-containing materials such as wallboards, floor tiles and sheeting, roofing and siding shingles, and construction mastics.
  • Class III asbestos work: Repair and maintenance operations of any asbestos-containing materials that will likely be disturbed. This is the type most likely used for removing asbestos.

Workers are trained in:

  • Pre-Asbestos Abatement Activities
  • Work Area Preparation
  • Establishing Decontamination Units
  • Using Personal Protection (Respirator and Protective Clothing)
  • Worker Decontamination Procedures
  • Safety Considerations in Abatement Area
  • Proper Handling & Disposal of Asbestos Waste

06. Process

Asbestos Abatement Process

 
Abatement begins with a certified asbestos inspector who takes samples of suspected asbestos. Samples are analyzed at a laboratory to determine the extent of the problem. The asbestos removal can be complex and includes several site preparations.
 

Site Preparations for Asbestos Removal

  • Work area established.
  • HVAC and electrical systems disabled.
  • New electrical system installed to power negative air pressure units that avoid contamination of air outside work area.
  • Decontamination enclosure systems installed.
  • Seal openings with plastic sheeting and duct tape.
  • Wet wipe or use a vacuum with a HEPA (high-efficiency particulate air) filter on non-movable objects to keep asbestos from becoming airborne.
  • Seal immobile items with plastic sheeting and duct tape.
  • Cover surface not getting abated with plastic sheeting.
  • Post warning signs that read: Danger, Asbestos, Cancer and Lung Disease Hazard, Authorized Personnel Only, Respirators, and Protective Clothing Are Required in this Area.
  • Clean up using a HEPA vacuum.
  • Disposal requires asbestos-containing waste be sealed in leak-tight containers while still wet, then labeled clearly and taken to qualified landfills that have specific requirements for securing the waste and preventing fibers from escaping into the air.
  • Vehicles that transport the waste to the landfill have specific requirements and labeling instructions.

07. Common Equipment

Common Asbestos Abatement Equipment

You may see these safety tools at the job site:
 
  • Hepa Vacuum
  • Respirator
  • Eyewear
  • Disposable Gloves
  • Disposable Coveralls
  • Rubber Boots
“You have to live with the legacy of the past, and the legacy here is all the asbestos is still in place. This epidemic is not going to end anytime soon.” - Epidemiologist Marty Kanarek - University of Wisconsin School of Medicine and Public Health
 

08. Costs

Asbestos Abatement Costs

Asbestos abatement is costly because of the federal regulations governing the process and protective measures taken to ensure the safety of asbestos abatement workers and the public.
 
 
  • Initial home inspection for asbestos
 
  • Sample analysis
 
  • Complete removal from an average-sized home
 
  • Commercial buildings can become multimillion-dollar asbestos abatement projects. For example, before the collapse of the Twin Towers at the World Trade Center, estimates were $1 million per floor.
 
  • Encapsulating asbestos, which means covering it with a protective barrier to reduce any risk of exposure, can lower abatement costs. Discuss it with the asbestos abatement company before work begins.
“There are so many factors involved, but abatement can range from a few hundred dollars to a few thousand dollars. And if it’s a certain type of material, it can be tens of thousands of dollars.” - Anthony Rich - Asbestos Inspector
 
  • Do Your Homework
Now that you understand some of the intricacies of asbestos, the danger it poses to you and others, the importance of properly removing it from a structure, and the costs involved, you are better equipped to make the right decision. Research asbestos abatement companies, ask for references and how they remove asbestos from properties. You, your loved ones, and the general public will be far safer when the threat of asbestos exposure is properly eliminated.

Ready To Make A Move?

We are here to serve you. We listen and care. Our goal is to build relationships worth having and to be your real estate agents of choice for life!

Follow Us on Instagram